PRO9.0
2 CHANNEL PROFESSIONAL POWER AMPLIFIER 2x1000W/8ohm
Features
- Stereo, parallel and bridge mono mode
- Signal input level, clip and protect indicators
- Three position input sensitivity switch 0.775V/32dB/36dB
- Precision front panel input attenuators
- Ground lift switch
- "Loop through" male XLR connectors to other amplifiers
- Fans exhaust through front grills
- Input overload limiter - automatically reduces channel gain when steady or excessive clipping is detected
- Output overload protection - automatically reduces channel gain when the amplifier senses mismatched loads
- Soft startup protection - gradually increases amplifier gain after the amplifier is turned on
- Thermal overload protection - activates when excessive heatsink or power transformer temperatures are detected
- Short circuit protection - attenuates the signal and disconnects the load
- DC voltage offset protection - disconnects output instantly to minimise the risk of speaker damage
Chassis Dimensions
Specifications
| 1kHz 0.1% THD+N: | |
|---|---|
| 8Ω Stereo Power: | 2x1000W |
| 4Ω Stereo Power: | 2x1500W |
| 2Ω Stereo Power: |
2x2200W |
| 8Ω Bridge Mono Power: |
3000W |
| 4Ω Bridge Mono Power: |
4400W |
| Max RMS Output Voltage (per channel): | 94V |
| Max Peak Output Voltage: |
135V |
| Frequency Response (+0/-0.3dB 1W/8Ω): | 20Hz-20kHz, -3dB@135kHz |
| Power Bandwidth (rated power at 4Ω, 1%THD+N): |
20Hz-20kHz, -1dB/+0.5dB |
| Protection: | ACL, IGM, Autoramp, LRS™, LX™, DC, On/Off Transient, Current Inrush, Sub/ultrasonic Input |
| THD+N (rated power, 4Ω/1kHz): | <0.05% |
| SMPTE IMD (rated power 8Ω 60Hz&7kHz): | <0.05% |
| Damping Factor (10Hz-400Hz at 8Ω): | ≥350 |
| Input CMRR (1kHz): | >60dB |
| Standard Input Sensitivity (rated power at 8Ω): | 0.775V/26dB/32dB |
| Input Impedance (balanced/unbalanced): | 20k/10kΩ |
| Hum and noise (A weighted -80dBW): | 108dB |
| Crosstalk (A weighted full power at 4Ω): | >60dB |
| Class: | G |
| Input Connectors (per channel): | XLR (female & male) |
| Output Connectors (per channel): | Speakon |
| Filter Storage: |
10000µF/100Vx12 |
| Power Supply (factory configured): | 230V 50Hz-60Hz |
| Idle Current Draw (220V): | 0.9A |
| 1/8 Power Current Draw (220V/4Ω): |
4.8A |
| 1/3 Power Current Draw (220V/4Ω): | 9.5A |
| Max Current Draw (220V/4Ω): | 18.0A |
| Thermal Emissions (1/8 power 4Ω): | 4750 BTU/hr |
| Thermal Emissions (1/3 power 4Ω): | 6300 BTU/hr |
| Cooling: | Two Speed DC Fans |
| LED Indicators (per channel): | Clip/Limit, Signal Level, Temp/DC, Active |
| Construction: | Steel Chassis (double thickness rack ears) |
| Net Weight: |
34.0kg |
| Gross Weight: | 38.5kg |
| Dimensions (W x D x H): |
483 x 519 x 132mm (3RU) |
| Packaging Dimensions (W x D x H): |
570 x 625 x 215mm |
| Warranty: | 3 Years |
