MX3200
3 CHANNEL (STEREO+SUB) PROFESSIONAL POWER AMPLIFIER 2x200W/8ohm + 550W/8ohm
Features
- Stereo left, right and sub channel
- Signal, clip and protect indicators
- Precision front panel input attenuators
- Channel inserts for processing
- Adjustable left and right channel crossover frequencies 70Hz-120Hz; sub channel band limited 35Hz-120Hz
- Switchable high pass filter - low frequency roll-off to prevent transformer saturation in distributed systems
- Ground lift switch
- Input overload limiter - automatically reduces channel gain when steady or excessive clipping is detected
- Output overload protection - automatically reduces channel gain when the amplifier senses mismatched loads
- Soft startup protection - gradually increases amplifier gain after the amplifier is turned on
- Thermal overload protection - activates when excessive heatsink or power transformer temperatures are detected
- Short circuit protection - attenuates the signal and disconnects the load
- DC voltage offset protection - disconnects output instantly to minimise the risk of speaker damage
Chassis Dimensions
Specifications
| 20Hz-20kHz 0.1% THD+N |
|
|---|---|
| 8Ω Stereo + Sub Power: |
2x200W + 1x550W |
| 4Ω Stereo + Sub Power: |
2x325W + 1x800W |
| 2Ω Sub Power: | 1x1200W |
| Frequency Response (+0/-0.3dB 1W/8Ω): | (70Hz-120Hz)-40kHz ±3dB 35Hz-120Hz ±3dB |
| THD+N (rated power 4Ω/1kHz): | <0.1% |
| SMPTE IMD (rated power 8Ω 60Hz&7kHz): | <0.1% |
| Damping Factor (10Hz-400Hz at 8Ω): | ≥250 ≥300 |
| Input CMRR (1kHz): | >60dB |
| Standard Input Sensitivity (rated power at 8Ω): | 0dB |
| Input Impedance (balanced/unbalanced): | 20kΩ/10kΩ |
| Hum and Noise (A weighted -80dBW): | 100dB |
| Crosstalk (A weighted full power at 4Ω): | >70dB |
| Class: | AB |
| Input Connectors (per channel): | XLR (female & male) TRS |
| Output Connectors (per channel): | Speakon |
| Power Supply (factory configured): | 230V 50Hz-60Hz |
| Idle Current Draw (220V): | 0.1A |
| 1/8 Power Current Draw (220V/4Ω): |
3.1A 5.0A |
| 1/3 Power Current Draw (220V/4Ω): | 5.2A 8.2A |
| Max Current Draw (220V/4Ω): | 9.0A 14.1A |
| Thermal Emissions (1/8 power, 4Ω): | 2030 BTU/hr |
| Thermal Emissions (1/3 power, 4Ω): | 2520 BTU/hr |
| Cooling: | 3 Speed Fan |
| LED Indicators (per channel): | Signal/Clip/Protect |
| Net Weight: |
25.0kg |
| Gross Weight: | 30.0kg |
| Dimensions (W x D x H): |
483 x 384 x 132mm (3RU) |
| Packaging Dimensions (W x D x H): |
570 x 625 x 215mm |
| Warranty: | 3 Years |
