MX6200
6 CHANNEL PROFESSIONAL POWER AMPLIFIER 6x140W/8ohm
Features
- 6 channel mode, bridge mono (channel-pair) mode
- Signal, clip and protect indicators
- Front panel input attenuators
- Channel inserts for processing
- Switchable high pass filter - low frequency roll-off to prevent transformer saturation in distributed systems
- Channel 1 split switch - connects channel 1 input to other selected amplifier channels
- Input overload limiter - automatically reduces channel gain when steady or excessive clipping is detected
- Output overload protection - automatically reduces channel gain when the amplifier senses mismatched loads
- Soft startup protection - gradually increases amplifier gain after the amplifier is turned on
- Thermal overload protection - activates when excessive heatsink or power transformer temperatures are detected
- Short circuit protection - attenuates the signal and disconnects the load
- DC voltage offset protection - disconnects output instantly to minimise the risk of speaker damage
Chassis Dimensions
Specifications
| 20Hz-20kHz 0.1%THD+N |
|
|---|---|
| 8Ω Power (per channel): |
6x140W |
| 4Ω Power (per channel): |
6x250W |
| 8Ω Bridge Mono Power: |
3x400W |
| Frequency Response (1W/8Ω): | 20Hz-20kHz -1dB/+0.5dB |
| THD+N (20Hz-20kHz half power): | <0.1% |
| Power Bandwidth (half power, 1%THD+N): |
10Hz-40kHz |
| Damping Factor (8Ω): | ≥250 |
| Intermodulation Distortion (60Hz:7kHz, 4:1 half power): |
<0.1% |
| Channel Separation (vol max): |
>60dB |
| Input Impedance (balanced/unbalanced): | 20kΩ/10kΩ |
| Residual Noise (vol max 12.7kHz LPF): | <-70dB |
| SN Ratio (12.7kHz LPF): | 100dB |
| Sensitivity (vol max rated power 8Ω): |
1.0V |
| Input Connectors (per channel): | XLR & TRS Combo |
| Output Connectors (per channel): | Phoenix Terminal |
| Power Supply (factory configured): | 240V 50Hz |
| Idle Current Draw: | 45W |
| 1/8 Power Current Draw (4Ω): |
200W |
| Max Current Draw (4Ω): | 1500W |
| Controls: | Power Switch, Bridge Mode, HPF, Chl 1 Split |
| Protection Circuits: | DC, Thermal, Input Limiter, Short Circuit, Current Inrush, Soft Startup, Output Overload |
| Cooling: | 2 Speed Fans |
| LED Indicators (per channel): |
Signal/Clip/Protect |
| Net Weight: |
22.0kg |
| Gross Weight: |
27.0kg |
| Dimensions (W x D x H): |
483 x 482 x 132mm (3RU) |
| Packaging Dimensions (W x D x H): |
570 x 625 x 215mm |
| Warranty: | 3 Years |
