VP9.0

2 CHANNEL PROFESSIONAL POWER AMPLIFIER 2x1000W/8ohm

Stereo, parallel and bridge mono mode
Signal input level, clip, protect and active indicators
LCD Display indicates operating mode, protection status and temperature of the modules
Precision front panel input attenuators
Ground lift switch
"Loop through" male XLR connectors to other amplifiers
Fans exhaust through back grills
Input overload limiter - automatically reduces channel gain when steady or excessive clipping is detected
Output overload protection - automatically reduces channel gain when the amplifier senses mismatched loads
Soft startup protection - gradually increases amplifier gain after the amplifier is turned on
Thermal overload protection - activates when excessive heatsink or power transformer temperatures are detected
Short circuit protection - attenuates the signal and disconnects the load
DC voltage offset protection - disconnects output instantly to minimise the risk of speaker damage

1kHz 0.1% THD+N
8Ω Stereo RMS Power:	2x1000W
4Ω Stereo RMS Power:	2x1500W
2Ω Stereo RMS Power:	2x1950W
8Ω Bridge Mono RMS Power:	3000W
4Ω Bridge Mono RMS Power:	3900W
Frequency Response (+0/-0.3dB 1W/8Ω):	20Hz-20kHz (+/-1dB)
Power Bandwidth (rated power at 4Ω, 1%THD+N):	20Hz-20kHz -0.84dB/+0dB
Protection:	DC, Short Circuit, High Temp, Current Inrush, Input Overload, Output, Soft Start
THD+N (rated power, 4Ω/1kHz):	<0.5%
SMPTE IMD (rated power, 8Ω, 50Hz & 7kHz):	<0.5%
Damping Factor (10-400Hz at 8Ω):	≥300
Input CMRR (1kHz):	>60dB
Standard Input Sensitivity (rated power at 8Ω):	1V
Input Impedance (balanced/unbalanced):	20kΩ/10kΩ
Hum and Noise (A weighted, -80dBW):	95dB
Crosstalk (A weighted, full power at 4Ω):	>60dB
Class:	AB
Input Connectors (per channel):	XLR (male & female)
Output Connectors (per channel):	Speakon (2-way)
Power Supply (factory configured):	230V 50Hz-60Hz
Idle Current Draw (220V):	0.2A
1/8 Power Current Draw (220V/4Ω):	5.8A
1/3 Power Current Draw (220V/4Ω):	12.0A
Max Current Draw (220V/4Ω):	20.0A
Thermal Emissions (1/8 power, 4Ω):	6525 BTU/hr
Thermal Emissions (1/3 power, 4Ω):	8750 BTU/hr
Cooling:	Two Speed DC Fan (flow front to rear)
Controls:	Front Panel: 2 Attenuators, Power Switch Rear Panel: Ground Lift & Mode
LED Indicators (per channel):	Clip, Signal Level, Protect, Power
Construction:	Steel Chassis, double thickness rack ears
Net Weight:	42.0kg
Gross Weight:	45.0kg
Dimensions (W x D x H):	482 x 485 x 132mm (3RU)
Packaging Dimensions (W x D x H):	570 x 625 x 215mm
Warranty	3 years